Displayed based on the required quantity range. Please verify the product's intended use, specifications, ingredients, and compatibility before purchasing.
Estimate the volume of only the items that will go into boxes.
Enter the inner dimensions of the boxes you plan to buy.
Adjust the fill ratio to account for empty space and packing materials.
What to Do in This Situation
For 2m³ of belongings, 50 × 40 × 40cm boxes, and an 80% fill ratio, you'll need 32 boxes. At 3m of tape per box, that's 96m total, requiring two 50m rolls.
How Is This Calculated?
Boxes = Roundup(Belongings Volume(m³) × 1,000 ÷ (Box Volume(L) × Fill Ratio)). Tape = Boxes × Tape per Box.
Change conditions to compare
Don't just compare the number of large and small boxes
Here is an example of packing the same 2m³ load into boxes with different internal dimensions.
The following is a hypothetical example. Check all the conditions under 'Expand Inputs' and adjust them to fit your situation.
50×40×40cm
Estimated Boxes
32 boxes
Volume per Box
80 L
Total Tape Length
96 m
Rolls of Tape to Buy
2 rolls
Expand Inputs
Volume of belongings: 2 m³
Internal box length: 50 cm
Box inner width: 40 cm
Box inner height: 40 cm
Box fill rate: 80 %
Tape per box: 3 m
Length per tape roll: 50 m
60×40×40cm
Estimated Boxes
27 boxes
Volume per Box
96 L
Total Tape Length
81 m
Rolls of Tape to Buy
2 rolls
Expand Inputs
Volume of belongings: 2 m³
Internal box length: 60 cm
Box inner width: 40 cm
Box inner height: 40 cm
Box fill rate: 80 %
Tape per box: 3 m
Length per tape roll: 50 m
What to Check Before Entering Values
Do not include the external volume of furniture and appliances in the load volume you plan to box up.
Buying fewer, larger boxes can make them too heavy to carry. Check the manufacturer's label for the maximum weight capacity.
Next Steps Based on Your Results
Calculate books and bedding separately. Books can hit the weight limit before the box is full, and packing materials reduce usable space.
Everyday Calc Notes · Updated 2026-10-15. Example results were generated using the calculation engine on this page. Purchasing a product does not affect the calculations.
Calculate volume and weight separately for moving boxes
The number of boxes calculated by volume is just an estimate of the space your belongings take up. Even with the same volume, items like books and bedding require different packing methods.
Box size comparison example
A box with internal dimensions of 50 × 40 × 40cm holds 80L. Assuming 80% usable space, it fits 64L. For a 2m³ (2,000L) load, 2,000 ÷ 64 rounded up gives you 32 boxes.
Switching to larger boxes
A 60 × 40 × 40cm box holds 96L, which gives you 76.8L of usable space at the same 80% fill rate. The same load would require 27 boxes. While you need fewer boxes, each one will be heavier, which doesn't necessarily make moving easier.
Errors from using external dimensions
Check whether the dimensions on the product page are external or internal. Adding packing materials and dividers will reduce the actual usable space. The extra space accounts for gaps you can't fill—it doesn't mean you can skip the bubble wrap.
Calculate by item category
Try calculating books, clothing, and kitchenware separately, then add them up. Distribute books across smaller boxes and leave more room for packing materials with fragile items. This calculator does not check maximum weight capacities or shipping restrictions.
FAQ
FAQ
Why not just calculate by pyeong (floor area)?
Because the amount of belongings can vary wildly for the same floor area. We calculate based on the actual volume of items you need to pack.
How much packing material do I need?
It depends on the fragility and surface area of your items, so we can't provide a one-size-fits-all number. Just lower the fill ratio to leave room for bubble wrap and paper.