Everyday Calc Notes Calculators & Mini Games

Curtain & Blind Size Calculator

Calculate the curtain fabric width or blind order dimensions based on your window measurements.

The numbers below are just examples. Change them to fit your situation.

cm
Enter the rail width for curtains, or the window frame width for blinds.
cm
Measure from the rings to the floor for curtains, or the window frame height for blinds.
Sheets
cm
cm

We don't save the numbers you enter.

How much do you need?

Enter a number
to see how much you need.

Change the values on the left and click Calculate.

Check the manufacturer's measurement guidelines before buying. Fullness and panel count only apply to curtains; outside margins only apply to outside mounts.

HOW TO USE

How to Use

  1. Measure your base dimensions according to your chosen installation type.
  2. Set the fullness and panel count for curtains, or the deductions and margins for blinds.
  3. Double-check the results against the manufacturer's ordering units.

What to Do in This Situation

For a 200cm track with 2x fullness and 2 panels, the total flat width is 400cm (200cm per panel). If it's 230cm from the ring to the floor with a 1cm clearance, the finished height is 229cm.

How Is This Calculated?

Total Curtain Width = Rail Width × Fullness Multiplier. Panel Width = Total Width ÷ Panels. Inside Mount Blind Width = Measured Width − Deduction. Outside Mount = Measured + (Margin × 2).

Change conditions to compare

Compare Fullness on the Same Rail

This compares different flat fabric widths while keeping the rail length the same.

The following is a hypothetical example. Check all the conditions under 'Expand Inputs' and adjust them to fit your situation.

1.5x Fullness

Total Flat Curtain Width
300 cm
Width per Panel
150 cm
Finished Curtain Height
229 cm
Expand Inputs
  • Installation type: Curtain · Rail
  • Base width: 200 cm
  • Base height: 230 cm
  • Curtain Fullness: 1.5x · Light Pleats
  • Number of panels: 2
  • Floor clearance / Inside mount width deduction: 1 cm
  • Outside mount margin (per side): 10 cm

2x Fullness

Total Flat Curtain Width
400 cm
Width per Panel
200 cm
Finished Curtain Height
229 cm
Expand Inputs
  • Installation type: Curtain · Rail
  • Base width: 200 cm
  • Base height: 230 cm
  • Curtain Fullness: 2x · Full Pleats
  • Number of panels: 2
  • Floor clearance / Inside mount width deduction: 1 cm
  • Outside mount margin (per side): 10 cm

What to Check Before Entering Values

Next Steps Based on Your Results

Once you have your finished width and height, check if the seller's dimensions are for the final sewn product. If you manually add extra fabric for hemming when ordering a finished product, the final size might be wrong.

Everyday Calc Notes · Updated 2026-10-15. Example results were generated using the calculation engine on this page. Purchasing a product does not affect the calculations.

FAQ

FAQ

What if the window width and track width are different?

Use the actual installed track width for curtains. If you only use the window width, you might not have enough fabric to cover the sides.

Does it automatically deduct the blind height too?

Inside mount heights use your exact input. Recommended deductions vary by product, so follow the manufacturer's guidelines.